Jetek-Pcb Co.,Limited is one of the leading China standard pcb manufacturers and suppliers, welcome to wholesale standard pcb from our factory.
Standard 4 layer PCB
FR-4 1.6MM 1/1/1/1OZ
Standard green solder mask/White silkscreen, HASL
Board material: FR-4 TG≥130
Board thickness: 1.6mm
PCB Layers: 4 layers
Copper thickness: 2oz
Surface finishing: HASL
Solder mask: Green
Silk screen: WHITE
Min line width: 0.20mm
Min line spacing: 0.20mm
Min hole size: 0.45
Impedance control: No
Buried and blind holes: No
Special process: No
* All products approved by ISO9001/TS16949 and UL certificate
* High quality products on Easy & safely way
* Quick turn & Reasonable price & excellent quality & Professional service
* Paypal payment for secure client's funds
* 100% open/shorted testing
Gold – Hard Gold
Hard Electrolytic Gold consists of a layer of gold plated over a barrier coat of nickel. Hard gold is extremely durable, and is most commonly applied to high-wear areas such as edge connector fingers and keypads.
Unlike ENIG, its thickness can vary by controlling the duration of the plating cycle, although the typical minimum values for fingers are 30 μin gold over 100 μin nickel for Class 1 and Class 2, 50 μin gold over 100 μin nickel for Class 3.
Hard gold is not generally applied to solderable areas, because of its high cost and its relatively poor solderability. The maximum thickness that IPC considers to be solderable is 17.8 μin, so if this type of gold must be used on surfaces to be soldered, the recommended nominal thickness should be about 5-10 μin.
Hard, Durable Surface
Long Shelf Life
Extra Processing / Labor Intensive
Use of Resist / Tape
Plating / Bus Bars required
Difficulty with Other Surface Finishes
Etching Undercut can Lead to Slivering / Flaking
Not Solderable Above 17 μin
Finish Does Not Fully Encapsulate Trace Sidewalls, Except in Finger Areas
We know almost all electronic engineers got a problem to found a right manufacturer to make PCB prototypes & small batch order because big factories don't want to make small orders, they always gave high price and very long delivery time, they can't provide fast delivery service. The small factories gave low price, but their quality control and service/English communication are not good, they can't meet customer’s request also. This is why we made JETEK and we are committed to make JETEK become a professional PCB supplier with rapid response、sincere service、excellent quality and reasonable price. Of course we also accept high volume PCB order.
JETEK’s engineers and workers are most have many years working experience, we supply our products all around the world. We have perfect processes to allow you to get the high quality PCB with door to door service with fastest turnaround, all of our PCBs approved by ISO9001/TS16949 and UL certificate.
Our Vision is to help people around the world to get high quality PCBs on an Easy & safely way.
Our advantage is Fast delivery time & Reasonable price & excellent quality & Professional service.
For the convenience of customers, we have the value-added services on Laser SMT stencil & PCB assembly.Contact us now to get the best quality PCBs at cheap price & easy way!