Black Solder Mask PCB, Standard FR4, Mid-Tg FR4,Hi-Tg FR4, Lead free assembly material, Halogen-Free, Ceramic filled , Teflon, Polyimide, BT, PPO, PPE, Hybrid, Partial hybrid, 2L Aluminium base PCB

Black Solder Mask PCB, Standard FR4, Mid-Tg FR4,Hi-Tg FR4, Lead free assembly material, Halogen-Free, Ceramic filled ,   Teflon, Polyimide, BT,  PPO, PPE, Hybrid, Partial hybrid, 2L Aluminium base PCB

Jetek-Pcb Co.,Limited is one of the leading China black solder mask pcb manufacturers and suppliers, welcome to wholesale black solder mask pcb from our factory. product name Black solder mask PCB Product Specifications FR-4 1.6MM 1/1OZ Black solder mask/Yellow silkscreen, Lead-free HASL product...

Product Details

Jetek-Pcb Co.,Limited is one of the leading China black solder mask pcb manufacturers and suppliers, welcome to wholesale black solder mask pcb from our factory.

product name

Black solder mask PCB

 

Product Specifications

FR-4 1.6MM 1/1OZ

Black solder mask/Yellow silkscreen, Lead-free HASL

 

product description

Board material: FR-4 TG≥130

Board thickness: 1.6mm

PCB Layers: 2 layers

Copper thickness: 1oz

Surface finishing: Lead Free HASL

Solder mask: Black

Silk screen: Yellow

Min line width: 0.20mm

Min line spacing: 0.20mm

Min hole size: 0.75

Impedance control: No 

Buried and blind holes: No

Special process: No

 

* All products approved by ISO9001/TS16949 and UL certificate

* High quality products on Easy & safely way

* Quick turn & Reasonable price & excellent quality & Professional service

* Paypal payment for secure client's funds

* 100% open/shorted testing 

 

 

Factory Show

Product Tips

Through-hole technology
Through-hole (leaded) resistors
The first PCBs used through-hole technology, mounting electronic components by leads inserted through holes on one side of the board and soldered onto copper traces on the other side. Boards may be single-sided, with an unplated component side, or more compact double-sided boards, with components soldered on both sides. Horizontal installation of through-hole parts with two axial leads (such as resistors, capacitors, and diodes) is done by bending the leads 90 degrees in the same direction, inserting the part in the board (often bending leads located on the back of the board in opposite directions to improve the part's mechanical strength), soldering the leads, and trimming off the ends. Leads may be soldered either manually or by a wave soldering machine

Through-hole PCB technology almost completely replaced earlier electronics assembly techniques such as point-to-point construction. From the second generation of computers in the 1950s until surface-mount technology became popular in the late 1980s, every component on a typical PCB was a through-hole component.

Through-hole manufacture adds to board cost by requiring many holes to be drilled accurately, and limits the available routing area forsignal traces on layers immediately below the top layer on multi-layer boards since the holes must pass through all layers to the opposite side. Once surface-mounting came into use, small-sized SMD components were used where possible, with through-hole mounting only of components unsuitably large for surface-mounting due to power requirements or mechanical limitations, or subject to mechanical stress which might damage the PCB.

 

Company Profile

We know almost all electronic engineers got a problem to found a right manufacturer to make  PCB prototypes & small batch order because big factories don't want to make small orders, they always gave high price and very long delivery time, they can't provide fast delivery service. The small factories gave low price, but their quality control and service/English communication are not good, they can't meet customer’s request also. This is why we made JETEK and we are committed to make JETEK become a professional PCB supplier with rapid response、sincere service、excellent quality and reasonable price. Of course we also accept high volume PCB order.

JETEK’s engineers and workers are most have many years working experience, we supply our products all around the world. We have perfect processes to allow you to get the high quality PCB with door to door service with fastest turnaround, all of our PCBs approved by ISO9001/TS16949 and UL certificate.

Our Vision is to help people around the world to get high quality PCBs on an Easy & safely way.

Our advantage is Fast delivery time & Reasonable price & excellent quality & Professional service.

For the convenience of customers, we have the value-added services on Laser SMT stencil & PCB assembly.Contact us now to get the best quality PCBs at cheap price & easy way!

  

Contact information

sales@jetek-pcb.com

 

Previous:Hard Gold Plating PCB, Standard FR4, Mid-Tg FR4,Hi-Tg FR4, Lead free assembly material, Halogen-Free, Ceramic filled , Teflon, Polyimide, BT, PPO, PPE, Hybrid, Partial hybrid, 2L Aluminium base PCB Next:3.2MM PCB, Standard FR4, Mid-Tg FR4,Hi-Tg FR4, Lead free assembly material, Halogen-Free, Ceramic filled , Teflon, Polyimide, BT, PPO, PPE, Hybrid, Partial hybrid, 2L Aluminium base PCB

Inquiry